产品中心

2.54 spacing empty needle
  • 2.54 spacing empty needle

2.54 spacing empty needle

Product Introduction

Product name: pin header

Specification: Plug-in/Horizontal 90°

Pitch: 2.54mm

PIN number: 2-40PIN

Remarks: Pin header series

订购热线:0755-33878358

详情

Pitch---refers to the distance between the center lines of every two PIN needles. Commonly used pitches are 2.54mm, 2.0mm, 1.27mm, 1.0mm, 0.8mm.


Generally, the smaller the electronic digital products, the smaller the spacing between the female headers, such as point reading pens, digital voice recorders, etc., generally use 1.0mm spacing and 1.27mm spacing on electronic digital products;


Plastic height---refers to the height of the colloid. The plastic heights of the headers with different spacings are different. The plastic heights of the headers with 2.54mm spacing are 3.5mm, 5.0mm, 5.7mm, 7.1mm, 8.5mm, There are six types of 11.0mm, of which the 3.5mm high single row is equipped with Y-type terminals.


Double row is equipped with U-shaped terminal, 5.0mm high is equipped with U-shaped terminal, 5.7mm high is equipped with Y-shaped terminal, 7.1mm high is equipped with U-shaped terminal, 8.5mm high is equipped with Y-shaped For the three types of terminals, U-shaped and O-shaped terminals, the 2.0-pitch female header plastic height has eight types: 2.2mm, 4.0mm, 4.3mm, 4.5mm, 4.6mm, 5.0mm, 6.35mm, 7.20mm, of which 2.2mm The tall ones are equipped with U-shaped terminals, and the 4.0mm, 4.3mm, and 4.6mm high ones are also equipped with U-shaped terminals.


These three plastic heights are relatively close, and of course there will be the same places. The same points: the terminal specifications for these three plastic heights are all 2.0*4.3mm. It is worth noting that these three plastic heights are relatively close. The eye can’t see it, so you must use the card to measure the difference. The three most commonly used plastic heights are 4.3mm high. Many hard disks use 4.3mm high interfaces, and 4.5mm high is the A product specially developed to replace 4.3mm height for electronic hard disk customers. The difference between it and 4.3mm height is that the 4.5mm height adopts a plug-in method. This method can ensure that it is inserted in the male seat. When the terminal does not return the PIN.


We always adhere to the business philosophy of "Quality First, Honesty and Pragmatism", and the policy of "Technological Innovation, Excellence", and dedicated to providing customers with high-quality products and satisfactory services. Cherish every opportunity to cooperate with customers. Shenzhen Products Xiang Technology Co., Ltd. specializes in the production and sales of connectors, and has always been a domestic leader in the connector application field of the mobile storage industry. Its high-quality shockproof and plug-in resistance are widely used in challenging environments and occasions. In the past eight years, the connector has gained a decisive market share in the mobile hard disk industry, and has become a qualified supplier of domestic and international first-line brands, specializing in the production of pin headers, header headers, header headers, and USB3.0 board terminal connections. Device.

推荐产品
联系我们
联系人:陈孝龙
手机:13632919081
电 话:0755-33878358/33878680
传真:0755-33586315
E-mail:pxkj_vip@163.com
地址:深圳市宝安区松岗镇罗田象山大道象山湾工业园C栋4楼
官方微信
Copyright © 2021 深圳市品翔科技有限公司 粤ICP备17086435号